CLASSIFICATION
Festo DFM-12-10-P-A-GF Medium sized Directional Driver
|
Gravity center distance from workload to connection board |
25 mm |
|
trip |
10 mm |
|
Piston diameter |
12 mm |
|
Operation mode of the driving unit |
Connecting yoke |
|
buffer |
P:Elastic buffer rings at both ends/plate |
|
Assembly position |
arbitrarily |
|
guide |
Ordinary bearing guidance |
|
Design Structure |
guide |
|
position detection |
Used for proximity sensors |
|
working pressure |
2 ... 10 bar |
|
top speed |
0.8 m/s |
|
Working mode |
Double action |
|
Working medium |
Compressed air meets the requirementsISO8573-1:2010 [7:4:4] |
|
Explanation on Work and Lead Medium |
Lubricated compressed air can be used(Once used, it is required to continuously use lubricated compressed air) |
|
Corrosion resistance levelCRC |
1 –Low corrosion impact |
|
ambient temperature |
-20 ... 80 °C |
|
Impact energy at the terminal location |
0.07 Nm |
|
Maximum allowable torque loadMxRelationship with itinerary |
0.6 Nm |
|
At the designated distancexsThe functional relationship between maximum useful load and travel time |
28 N |
|
6 barTheoretical force of time, recovery stroke |
51 N |
|
6 barTheoretical force of time, process |
68 N |
|
Mobile Quality |
172 g |
|
Product weight |
344 g |
|
Other available interfaces |
Refer to product drawings |
|
Pneumatic connection |
M5 |
|
Material remarks |
accord withRoHS |
|
Material information, cover |
Forged aluminum alloy |
|
Material information, sealing |
NBR |
|
Material information, shell |
Forged aluminum alloy |
|
Material information, piston rod |
High alloy steel,Corrosion resistance |