CLASSIFICATION
Festo DFM-16-20-P-A-GF Medium sized Directional Drive
Festo DFM-16-20-P-A-GF Medium sized Directional Drive
DFM-16-20-P-A-GF
Product Description:
| Gravity center distance from workload to connection board |
50 mm |
| trip |
20 mm |
| Piston diameter |
16 mm |
| Operation mode of the driving unit |
Connecting yoke |
| buffer |
P:Elastic buffer rings at both ends/plate |
| Assembly position |
arbitrarily |
| guide |
Ordinary bearing guidance |
| Design Structure |
guide |
| position detection |
Used for proximity sensors |
| working pressure |
2 ... 10 bar |
| top speed |
0.8 m/s |
| Working mode |
Double action |
| Working medium |
Compressed air meets the requirementsISO8573-1:2010 [7:4:4] |
| Explanation on Work and Lead Medium |
Lubricated compressed air can be used(Once used, it is required to continuously use lubricated compressed air) |
| Corrosion resistance levelCRC |
1 –Low corrosion impact |
| ambient temperature |
-20 ... 80 °C |
| Impact energy at the terminal location |
0.15 Nm |
| Maximum allowable torque loadMxRelationship with itinerary |
1.3 Nm |
| At the designated distancexsThe functional relationship between maximum useful load and travel time |
56 N |
| 6 barTheoretical force of time, recovery stroke |
90 N |
| 6 barTheoretical force of time, process |
121 N |
| Mobile Quality |
242 g |
| Product weight |
507 g |
| Other available interfaces |
Refer to product drawings |
| Pneumatic connection |
M5 |
| Material remarks |
accord withRoHS |
| Material information, cover |
Forged aluminum alloy |
| Material information, sealing |
NBR |
| Material information, shell |
Forged aluminum alloy |
| Material information, piston rod |
High alloy steel,Corrosion resistance |